AC Charging

Have more questions? Submit a request

AC Charging is available at some Evie charging stations. You must bring your own Type 2 cable to use an Evie AC charger. 

AC Chargers are shown in the app like this ๐Ÿ‘‡

AC Half Sheet.png

To start a charge on an Evie Schneider AC Charger

  1. Plug your cable into your car.
    Artboard 1.png
  2. If you have an Evie Pass, tap it on the charger and skip to Step 4.
    Artboard 15.png
  3. If you're using the app, select the port on which you would like to start a charge then tap "Plug in & start charging".
    AC Plug In.png
  4. Press the green button above your selected port to unlock the flap.
    Artboard 2.png
  5. Open the flap over your selected port.
    Artboard 3.png
  6. Plug your cable into your selected port, and away you go!
    Artboard 14.png

To stop charging on an Evie Schneider AC Charger

  1. Stop the session from within your car.
    Artboard 16.png
  2. Disconnect the cable from your car.
    Artboard 17.png
  3. Disconnect the cable from the charger.
    Artboard 18.png

If you have trouble getting the cable out of your car, try locking and unlocking it.

Articles in this section

Was this article helpful?
0 out of 0 found this helpful